84581 Jan 20 15:17:25 localhost kernel: [26826.493472] e1000e 0000:00:1f.6 eth1: Detected Hardware U nit H ang: 84582 Jan 20 15:17:25 localhost kernel: [26826.493472] TDH <e2> 84583 Jan 20 15:17:25 localhost kernel: [26826.493472] TDT <24> 84584 Jan 20 15:17:25 localhost kernel: [26826.493472] next_to_use <24> 84585 Jan 20 15:17:25 localhost kernel: [26826.493472] next_to_clean <e1> 84586 Jan 20 15:17:25 localhost kernel: [26826.493472] buffer_info[next_to_clean]: 84587 Jan 20 15:17:25 localhost kernel: [26826.493472] time_stamp <100652ad0> 84588 Jan 20 15:17:25 localhost kernel: [26826.493472] next_to_watch <e3> 84589 Jan 20 15:17:25 localhost kernel: [26826.493472] jiffies <100653110> 84590 Jan 20 15:17:25 localhost kernel: [26826.493472] next_to_watch.status <0> 84591 Jan 20 15:17:25 localhost kernel: [26826.493472] MAC Status <40080083> 84592 Jan 20 15:17:25 localhost kernel: [26826.493472] PHY Status <796d> 84593 Jan 20 15:17:25 localhost kernel: [26826.493472] PHY 1000BASE-T Status <3800>
84594 Jan 20 15:17:25 localhost kernel: [26826.493472] PHY Extended S t a t u s <3000> 84595 Jan 20 15:17:25 localhost kernel: [26826.493472] PCI Status <10> 84596 Jan 20 15:17:27 localhost kernel: [26828.477219] e1000e 0000:00:1f.6 eth1: Reset adapter unexpectedly 84597 Jan 20 15:17:27 localhost kernel: [26828.572809] br10: port 1(eth1) entered disabled state 84598 Jan 20 15:17:31 localhost kernel: [26832.307912] e1000e 0000:00:1f.6 eth1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx 84599 Jan 20 15:17:31 localhost kernel: [26832.310448] br10: port 1(eth1) entered blocking state 84600 Jan 20 15:17:31 localhost kernel: [26832.312776] br10: port 1(eth1) entered forwarding state
root@srv18: ~ # ethtool eth1
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
MDI-X: off (auto)
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
drv probe link
Link detected: yesroot@srv18: /sys/bus/pci/devices/0000:00:1f.6/power # cat control on