- 主题:有没有苹果的做工,linux系统、thinkpad的键盘三者合体
macbook 装linux,键盘凑合用吧
--
FROM 111.206.94.*
忘了,我就记得T42和T43是,最后一代钛合金的。因为边角磨损露过白
后来再买的T61就不是了,A盖还不平
T61之后就没买过TP,后来单位配的X系列用的也不多
【 在 FLYBBS 的大作中提到: 】
: T41也是钛合金外壳吗?
:
--
FROM 114.242.179.*
镁合金也能露白吧?
【 在 CanonFans 的大作中提到: 】
: 忘了,我就记得T42和T43是,最后一代钛合金的。因为边角磨损露过白
: 后来再买的T61就不是了,A盖还不平
:
: ...................
--来自微水木3.5.10
--
FROM 175.160.218.64
不知道,我就T42边角露过白,T61没露过
官方宣传的是钛合金,那个盖子是。后面的T61好像是碳纤维面模,镁铝合金骨架
【 在 FLYBBS 的大作中提到: 】
: 镁合金也能露白吧?
--
FROM 114.242.179.*
碳纤维不防刺,综合来说还是钛合金比较好。
【 在 cppbuilder 的大作中提到: 】
: 碳纤维比钛合金好吧,又轻又结实
:
: 【 在 FLYBBS 的大作中提到: 】
: ...................
--来自微水木3.5.10
--
FROM 175.160.218.64
省流:早期IBM版T系列是钛合金外壳(wikipedia);IBM后期三款为镁合金+碳纤维(此后数据都来自联想官网);联想接手早期为各种PC材料+碳纤维;新的T14系列(黑色)比较乱以PPS/GF,PA/GF,PC/CF为主,特殊的有gen3独显版下盖铝合金,gen4上盖铝合金
作为对比,X1 Carbon系列上盖都是碳纤维,下盖都是镁/铝合金
从T4x(IBM出品的最后三代)到T420如下:
T41
Magnesium composite in the top cover
titanium-reinforced CFRP in bottom cover
T42
Magnesium composite in the top cover
titanium-reinforced CFRP in bottom cover
T43
Magnesium composite in the top cover
titanium-reinforced CFRP in bottom cover
T60
14.1": magnesium composite in top cover, CFRP bottom cover
15": CFRP in top/bottom
T61
Top: Super-Elastic PolyCarconate (SEPC);
Bottom: Carbon-Fiber Reinforced Plastic
T400
Top: Super-Elastic PolyCarbonate (SEPC);
Bottom: Carbon-Fiber Reinforced Plastic
T400s
Display cover: Carbon-fiber reinforced plastic (top), glass-fiber reinforced plastic (side walls);
Base: Magnesium alloy
T410
Top: High Elasticity PolyCarbonate (HEPC);
Bottom: Carbon-Fiber Reinforced Plastic
T410s
Display cover: Carbon-fiber reinforced plastic (top), glass-fiber reinforced plastic (side walls);
Base: Magnesium alloy
T500
Top: Super-Elastic PolyCarbonate (SEPC);
Bottom: Carbon-Fiber Reinforced Plastic
T510
Display cover: Glass-fiber reinforced plastic;
Base: Carbon-fiber reinforced plastic
T420
Display cover: Carbon-fiber / Glass-fiber hybrid;
Bottom: Carbon-Fiber Reinforced Plastic
T420s
Display cover: Hybrid Carbon-fiber reinforced plastic;
Bottom: Magnesium alloy
T520
Display cover: Carbon-fiber / Glass-fiber hybrid;
Bottom: Glass-fiber reinforced plastic without paint
现在的T14系列如下:
Gen1
Top: PPS / 50% GF
Bottom: PA / 50% GF
Gen2
Top: PPS / 50% GF
Botton: PA / 50% GF
Gen3
with integrated graphics: PC + 20% CF + 50% GF (top), PPS (bottom)
with discrete graphics: PC + 20% CF + 50% GF (top), aluminium (bottom)
Gen4
Top: aluminium
Bottom: PPS
Gen5
Top: PC + 20% CF
Bottom: PC + 20% CF
※ 修改:·cppbuilder 于 Oct 17 15:45:54 2024 修改本文·[FROM: 1.202.8.*]
※ 来源:·水木社区 mysmth.net·[FROM: 1.202.8.*]
修改:cppbuilder FROM 1.202.8.*
FROM 1.202.8.*
赞
【 在 cppbuilder 的大作中提到: 】
: 整理自thinkpads dot com和联想官方pdf
: 跟帮主申请个mark吧 @dmyk
--
FROM 210.72.33.*
挺不错。
X1上盖是碳纤维,下盖合金,
是不是发现消费者都习惯性保护屏幕,把下盖对着电源鼠标等硬物?
【 在 cppbuilder 的大作中提到: 】
: 最新的T14系列(黑色)比较乱,PPS/GF,PC/CF/GF,PA/GF为主。特殊的有gen3独显版下盖铝合金,gen4上盖碳纤维
: (作为对比,x1 carbon系列上盖都是碳纤维,下盖是镁/铝合金)
: 从T4x(IBM出品的最后三代)到T420如下:
: ...................
--
FROM 175.160.218.64
我不懂这个了,盲猜是为了让CD面有个刚体框架吧
【 在 FLYBBS 的大作中提到: 】
: 挺不错。
: X1上盖是碳纤维,下盖合金,
: 是不是发现消费者都习惯性保护屏幕,把下盖对着电源鼠标等硬物?
: ...................
--
FROM 1.202.8.*
能不能做个名词解释
【 在 cppbuilder 的大作中提到: 】
: 省流:早期IBM版T系列是钛合金外壳(wikipedia);IBM后期三款为镁合金+碳纤维(此后数据都来自联想官网);联想接手早期为各种PC材料+碳纤维;新的T14系列(黑色)比较乱以PPS/GF,PA/GF,PC/CF为主,特殊的有gen3独显版下盖铝合金,gen4上盖铝合金
: 作为对比,X1 Carbon系列上盖都是碳纤维,下盖都是镁/铝合金
: 从T4x(IBM出品的最后三代)到T420如下:
: ...................
--
FROM 210.72.33.*